Connecting The Hds6000 To A Notebook - Leica HDS6000 User Manual

3.10.2
Connection to the
notebook
Preparing to Scan

Connecting the HDS6000 to a Notebook

1. Connect the HDS6000 to the notebook with a ethernet cable. The LAN connec-
tion should be automatically activated in the PC otherwise the attributes of the
LAN connection could be shown by choosing network connections. Set a check
mark at internet protocol (TCP/IP) and open the attributes. In attributes the fields
"source IP address automatically" and "source DNS address automatically" should
be checked.
2. Settings on the HDS6000:
• Switch on the HDS6000 (press the ON/OFF button for 0.3 sec.).
• Expand the main menu. Press
• Select Settings in the main menu using
• Then select yes in the DHCP Client submenu. Confirm with
• Select yes in the DHCP Server submenu. Confirm with
• Reboot the HDS6000.
3. Settings on the notebook:
On the notebook you can access the data on the HDS6000 using the web
browser or an FTP client:
for 5 sec. after system start-up.
HDS6000
.
.
.
75