Saving A Memory Position; Adjusting The Table Top To A Memory Position - LOGICDATA LOGIC OFFICE Series Manual

9.3.2 SAVING A MEMORY POSITION

This function saves a set Table Top position. You can save up
to one sitting and one standing position with the Motion@
Work App.
Move the Table Top to the desired height (Chapter
1
9.3.1)
On the home screen, tap "Save", then "Sitting" or
2
"Standing" to save the position.
▸ The Memory Position has been saved
Fig. 10: Saving a Memory Position
9.3.3 ADJUSTING THE TABLE
TOP TO A SAVED MEMORY
POSITION
This function allows you to move the Taple to to a saved
Memory Position.
Version A (Auto-Movement Disabled):
On the home screen, tap and hold the Memory
1
Position you wish to move to
Keep holding until the Memory Position has
1
been reached
▸ Release to continue
Fig. 11:

Adjusting the Table Top to a Memory Position

LOGICLINK - MANUAL // PAGE 29
2
1
1