Standard Operation; Adjusting The Table Top Height - LOGICDATA LOGIC OFFICE Series Manual

9.3 STANDARD OPERATION

CAUTION Risk of minor or moderate injury through uncontrolled movement
The table may not always stop exactly at the expected position. Failure to anticipate the
table's movements may lead to minor or moderate injury through crushing.
• Wait until the system has completely stopped before attempting to use the table
CAUTION Risk of minor or moderate injury through unsecured objects
While the table moves up and down, unsecured objects may fall off the table and onto
body parts. This may lead to minor or moderate injury through crushing.
• Ensure loose objects are kept away from the edge of the table
• Do not leave unnecessary objects on the table during movement

9.3.1 ADJUSTING THE TABLE TOP HEIGHT

CAUTION Risk of minor or moderate injury through crushing
Your fingers may be crushed when you attempt to change the height of the table
• Keep fingers away from moving parts
• Ensure that no persons or objects are in the table's range of motion
INFO
The Table Top will move up or down until the UP or DOWN Key is released, or if a pre-de-
fined stopping point has been reached
To move the Table Top UP:
On the home screen, press and hold the "UP" but-
1
ton until the desired height has been reached
To move the Table Top DOWN:
On the home screen, press and hold the "DOWN"
2
button until the desired height has been reached
Fig. 9: Adjusting the Table Top Height
LOGICLINK - MANUAL // PAGE 28
1
2