Bluetooth; Select A Preset Fm Radio Station; Play From A Bluetooth Device; Control Playback - Philips TAVS700 User Manual

Select a preset FM radio station

Rotate the big knob on the left side to select
your desired preset number.
The speaker will tune to the selected station
automatically.
Show RDS information
RDS (Radio Data System) is a service that
a l l o w s F M s t a t i o n s t o s h o w a d d i t i o n a l
information.
1
Press and hold the small knob on the right
side for 2 second or more to display the
menu.
2
Rotate the big knob on the right side to
select the menu "INFO".
3
Press the small knob on the right side to
confirm your select.
4
Rotate the big knob on the right side to
view the information.
5
Press the small knob on the right side to
exit the information view.
The information list is as follows:
- Station name
- Program type such as [NEWS] (news),
[SPOR T] (sport), [POP M] (pop music)...
- Time
- Text
- Frequency
Note
• Depending on the RDS station you are tuning
to, some information modes may be
unavailable.

5 Bluetooth

Play from a Bluetooth device

You can stream audio from a device to this
speaker using Bluetooth connection.
Note
• Make sure to turn Bluetooth on to make a
device discoverable before pairing.
• The speaker and a device must be placed
within 10 meters Bluetooth sensing distance.
1
Rotate the small knob on the left side to
select BT, "BT" is blink.
2
On a Bluetooth device, turn Bluetooth on
to make it discoverable.
3
Select "Philips VS700" on the device for
pairing.
- For an older device, input pairing
password 0000.
- The "BT" light on when connection is
successful.
4
Press the B button on the Bluetooth
device to start streaming music.

Control playback

During play
- Turn the small knob on the right side to
increase/decrease the volume.
- Press the small knob on the right side to
play/pause.
- Turn the big knob on the right side to skip
to the previous/next track.
Disconnect Bluetooth pairing
1
Press and hold the small knob on the right
side for 2 second or more to display the
menu "CLEAR BT".
2
Press the small knob on the right side to
confirm, "BT" is blink.
EN 9