Play; Play From Bluetooth-Enabled Devices; Pair And Connect A Second Device; Listen To The Radio - Philips TAM2505/10 User Manual

4 Play

Note
the operational range.
Bluetooth enabled device is approximately 10 meters
(30 feet).
Bluetooth devices.
Play from Bluetooth enabled
devices
1. Press to select the Bluetooth source using the
Remote Control.
- [BT] is displayed.
- [BT] on the display ashes.
2. On your device that supports
Advanced Audio Distribution Pro le (A2DP),
enable Bluetooth and search for Bluetooth
devices that can be paired (refer to the user
manual of the device).
3. Select "Philips M2505" on your Bluetooth enabled
device and if necessary input '0000' as the paring
password.
pair with this product, press and hold PAIRING for
more than 2 seconds to enter pairing mode.
solid on the display and con rmation sound.
4. Play audio on the connected device.
to this product.
To disconnect the Bluetooth-enabled device:

Pair and connect a second device

You can pair and connect a maximum of two
Bluetooth-enabled devices to this product
actively at the same time.
1. In Bluetooth mode, press and hold PAIRING for
more than 2 seconds to enter pairing mode.
2. Connect a second Bluetooth device to this
product.
8 EN
Philips M2505" or cannot
[BT] turn
- The rst connected device also stays connected
to this product.
stop music play from the rst device, and then
play music from the second device.
To connect and play from the third Bluetooth-
enabled device
PAIRING for more than 2 seconds to
enter pairing mode.
- The rst connected device or the device with no
music playback is disconnected.
5 Listen to the
radio
Note
or other radiation source.
the position of the antenna.
With this product, you can listen to DAB+ radio
and FM radio.

Listen to DAB+ radio

Digital Audio Broadcasting+ (DAB+) is a way of
broadcasting radio digitally through a network
of transmitters. It provides you with more choice,
better sound quality and more information.
Note
broadcast from time to time. To make new DAB+
stations and services available, perform scan
regularly.
Store DAB+ radio stations automatically
1. Press DAB/FM repeatedly to select DAB+ source.
service is stored, Press [SCAN/OK] key to active the
program mode.