Listen To Fm Radio; Select A Preset Dab Radio Station; Store Fm Radio Stations - Philips TAVS700 User Manual

Note
• If the speaker is unplugged or if a power failure
occurs, the preset stations will not be erased.

Select a preset DAB radio station

Rotate the big knob on the left side to select
your desired preset number.
The speaker will tune to the selected station
automatically.
DAB Information Display
You can view the DAB service information in
the following modes.
1
Press and hold the small knob on the right
side for 2 second or more to display the
menu.
2
Rotate the big knob on the right side to
select the menu "INFO".
3
Press the small knob on the right side to
confirm your select.
4
Rotate the big knob on the right side to
view the information.
5
Press the small knob on the right side to
exit the information view.
The information list is as follows:
- Station Name
- Ensemble Name
- Clock
- DLS (Dynamic Label Segment)
- Signal Strength
- Programme Type
- Frequency
- Bit Rate
- Audio
Note
• Depending on the DAB radio station you
are tuning to, some information modes may be
unavailable.
8 EN

Listen to FM radio

M na ua l ly tu n i n g to a F M ra d i o
station
1
Rotate the small knob on the left side to
select FM radio.
2
Rotate the big knob on the right side to
adjust the FM frequency until you find the
station you want.

Store FM radio stations

Note
• You can store up to 20 FM radio stations.
 Automatically
1
Press and hold the small knob on the right
side for 2 second or more to display the
menu "SCAN".
2
Press the small knob on the right side to
stores all the available FM radio stations
and broadcasts the first station.
- "SCANNING" is blink.
 Manually
1
Rotate the big knob on the right side to
tune to a FM radio station.
2
Press the small knob on the right side to
activate programming mode.
3
Rotate the big knob on the right side to
select a preset number.
4
Press the small knob on the right side to
confirm to store the station.
5
Repeat steps 1 to 4 to store other FM
stations.
Note
• If the speaker is unplugged or if a power failure
occurs, the preset stations will not be erased.