Contents 1 Important................2 Safety......................2 Notice......................2 2 Your Micro Music System ..........4 Introduction....................4 What's in the box ..................4 Overview of the main unit..............4 Overview of the remote control ............5 3 Get started ................6 Place your product..................6 Connect the radio antenna ..............6 Connect power..................6 Prepare the remote control..............6 Power on.....................7...
Keep this apparatus away from direct sunlight, naked ames 2014/53/ EU. You can nd the Declaration of Conformity or heat. on www.philips.com/support. ・ Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power.
Page 4
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (bu er) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
• 1 x radio antenna Congratulations on your purchase, and • Remote control (with 2 X AAA batteries) welcome to Philips! To fully bene t from • Printed materials the support that Philips o ers, register your product at www.philips.com/support.
Overview of the remote control - Switch this product on or to standby. - Select FM or DAB+ source. - Select a FM station. - Select a DAB+ station. - Program radio stations. - Auto store radio stations. - Adjust volume. - Select AUDIO IN source.
Always follow the instructions in this chapter that you have completed all the other connections. in sequence. If you contact Philips, you will be asked for the model and serial number of this speaker. The Place your product model number and serial number are on the Before you place this product on the table, back of the speaker.
Power on Press - the product switches to the last selected source. Switch to standby mode Press again to switch the product to standby with no clock display, or to standby with clock display. - The red standby indicator lights up. - In standby, it will stay at previous selected function.
'0000' as the paring and FM radio. password. • If you fail to search for “Philips M2505” or cannot Listen to DAB+ radio pair with this product, press and hold PAIRING for more than 2 seconds to enter pairing mode.
2. Press and hold [SCAN/OK]for more than 2 Listen to FM radio seconds. - The product scans and stores all DAB+ radio stations automatically. Tune to an FM radio station 1. Press DAB/FM to select a FM radio station 2. Press and hold or more than 2 seconds.
Set the sleep timer 6 Adjust sound This music system can switch to standby automati- cally after a set period of time. • When the music system is turned on, press The following operations are applicable to all repeatedly to select a set period of time (in supported media.
240MHz Preset stations: AUX IN input level: 600mV ±100mV RMS Headphone: 3.5mm jack Power Model (Philips branded AC power adapter): AS190-090-AD190 Input: 100-240 V~, 50/60 Hz, 1.2A Output: DC 9.0V, 1.9A Operation power consumption: Standby power consumption: < 0.5W (clock display o )
Bluetooth cannot be connected with this unit. (www.philips.com/support). When you contact • The device does not support the profiles required Philips, make sure that the device is nearby and the for this unit. model number and serial number are available.