en
Setting the air speed
Horizontal blowing direc-
tion (oscillation)
Setting the time
preset clock
Vertical blowing direction
12
Operation
• Connect the power plug with a socket
Press the "1" (low) button for a slow speed
Press the "2" (medium) button for a medium speed
Press the "3" (high) button for a high speed
"0" button OFF
For this use the button (10) on the motor element.
• Button pressed: Oscillation ON
• Button pulled out: Oscillation OFF
You can preselect the running time of 0 – 120 min.
To do so rotate the time preset button (12) clockwise up
to the desired time.
The fan stops when the set time has expired.
You can set the fan by hand to the desired vertical
blowing direction – approximately 15° downwards to
approximately 25° upwards.
• Switch off the cooling fan
• Hold the bottom part of the cooling fan and then only
point the motor element from the back:
• to the front (downward air flow)
• or to the rear (upwards air flow)
until the desired position has been reached.
ATTENTION!
Never push on the protective grid.