Wildix DUOLED-BT User Manual

DUOLED-BT HEADSET USER GUIDE - ENGLISH
PACKING LIST
1 x DuoLED-BT Headset
1 x Base Station
1 x USB Type-C to Type-C cable
1 x USB Type-A to Type-C adapter
1 x portable case
Note: The Headset support starts from the following Headset
integration versions (released in WMS 5.02): 2.9.9 (Windows) and
2.9.0 (macOS).
SAFETY INFORMATION
https://www.wildix.com/safety-information/
COMPATIBILITY
The Headset supports dual (multipoint) wireless connection,
which means it can be connected to two devices
simultaneously:
1. Via Base Station. Such connection provides full support of
LED user and call statuses and compatible with:
• Apple Mac, Windows PC
• WorkForce *
• WelcomeConsole *
* Temporary limitations:
Full LED user statutes support for WorkForce, WelcomeConsole
•
will be available later
The Headset cannot be connected to Vision/ SuperVision via
•
Base Station, the support will be available later
2. Via Bluetooth module embedded in the Headset itself. Such
connection doesn't provide LED statutes support and
compatible with:
• Android, iOS apps
• Vision/ SuperVision
• W-AIR LifeSaver
• W-AIR Med
• W-AIR Office
POWER ON/ POWER OFF
Press Multi-function button for 3 seconds.
HEADSET AND BASE STATION OVERVIEW
Version 06/2021
CHARGING
1. Connect USB cable to the Base Station
2. Plug the cable into a device USB port (use Type-A
adapter if needed)
3. Place DuoLED-BT into the Base Station
4. When charging, Headset status LED turns red
5. When charged, Headset status LED turns blue
Battery charging time
• Less than 60 minutes to charge 20%
• Less than 90 minutes to charge 50%
• Fully charged in less than 3,5 hours
Standby time
• Up to 100 hours if not connected to any device
• Up to 15 hours if connected to a device with full LED user
and call statutes support
• Up to 20 hours if connected to if connected to a device
with LED call statutes support
CONNECT VIA THE BASE STATION
1. Connect USB cable to the Base Station
2. Plug the cable into a device USB port (use Type-A to
Type-C adapter if needed)
3. Turn the Headset on
4. The Headset Status LED starts blinking and the voice
prompt announces "Your Headset is connected"
5. For Collaboration, set "Wildix DuoLED-BT" as audio
device in Collaboration -> Settings -> Web phone
CONNECT VIA BLUETOOTH EMBEDDED IN THE
HEADSET
1. Unplug the Base Station and turn the Headset off
2. Activate Bluetooth on a device you want to connect
the Headset to
3. Press and hold the Multi-function button for 3
seconds until you hear "Power on". Keep pressing for
3 seconds more until you hear "Pairing"
4. Search for DuoLED-BT in Bluetooth devices list on
your device and select it for pairing
5. If pairing is successful, the voice prompt announces
"Paired... Your Headset is connected"
Page 1 of 2