1. Manuals
  2. Brands
  3. Shining 3D Manuals
  4. 3D Printers
  5. einstart-c
  6. Quick start

Shining 3D Einstart-C Quick Start

Hide thumbs Also See for Einstart-C:
1
2
3
4
5

Advertisement

Table of Contents

Einstart
-C
®
Quick Start Guider
HANGZHOU SHINING3D TECH CO., LTD.
STOCK CODE：830978

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Einstart-C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Shining 3D Einstart-C

Summary of Contents for Shining 3D Einstart-C

  • Page 1 Einstart ® Quick Start Guider HANGZHOU SHINING3D TECH CO., LTD. STOCK CODE：830978...
  • Page 2 1. Printer and Accessories 2. Preparation Step 1: Unpack the inner and outer packaging. Step 2: Remove the cushioning foam.
  • Page 3 Step 3: Place the printer on a leveled desktop and connect the power supply as demonstrated by the picture below. Step 4: Install the print bed following these steps. (1) Remove the print bed from its box. Open the door to the printer and slide the platform holder forward to the middle of the printer. (2) Fit the print bed to the platform holder.
  • Page 4 (5) Load the filament referring to the instructions in Chapter 3. (6) Once the filament is extruded smoothly from the nozzle, insert the Bowden Tube into the extruder through the quick connector in B. 3. Quick Start 1. Turn on the printer and load the filament. Please continue feeding the filament by hand until the extruder catches the filament and extrudes it smoothly.
  • Page 5 2. Print the local data once the filament loading is completed. For more instruction, please refer to the User Manual.

Table of Contents