GE Current Lumination IS Series Installation Manual page 14

How To Replace Light Engine in the Field
For LumenCode [65][85][A3][A7][A1][A2][B1][B4] Only
1
TURN OFF POWER. Remove PSU
cover.
4
With a flathead screwdriver,
unsnap clip near the end. Continue
unsnapping remaining clips.
7
Clip removeable light engine into
place.
2
Cut blue and red wires from
light engine (other wires hidden
for clarity).
5
Remove removeable light engine.
8
Close the access door.
14
3
With a flathead screwdriver, open
access door.
6
Take the red and blue wires of the
new light engine and fish them
through opening.
9
Reconnect blue and red wires
from the new light engine (other
wires hidden for clarity). Reinstall
PSU cover.
New light
engine