GE Current Lumination IS Series Installation Manual page 12

Upper
bridge
Lower
bridge
7
Remove 4 screws to detach upper bridge from
lower bridge and replaceable light engine.
9
At PSU side, insert light engine into bottom bridge.
Blue/red wiring passes through the top hole. Thru
wiring passes through the bottom hole.
Upper
bridge
Lower
bridge
11
Reassemble the upper and lower bridge to the
fixture with 4 screws.
Light engine
Top hole
(blue/red wires)
Bottomhole
(thruwiring)
Light engine
12
Blue/red wiring
New light
engine
8
Pull thru wiring (saved from Step 6) through the
new light engine and lower bridge.
10
Reattach the ground wire and screw.
12
Reconnect DC wires according to color (other wires
not shown for clarity).
Wires exitbottom
hole of bridge
DCwires
(blue/red)