7-2-2) Hook; 7-3) Cleaning; 7-4) Waste Oil - SunStar SJS/A-BA2 User Manual

7.2.2) Hook
Remove the cap of the most optimized hook lubrication system on the upper bed using the screwdriver and supply oil.
7.3) Cleaning
The belt loop sewing machine is equipped with an air gun. Use the air gun to remove foreign materials stuck on moving
parts.
No.
1 Around hook
2 Thread take-up lever / thread tension device
Around moving and fixed blades
3
Use the air gun to remove dust around the moving
and fixed blades from the below of the needle plate.
7.4) Waste Oil
The waste oil container under the table should be emptied
when it is filled.
1) When disassembling the waste container, take care to prevent oil from dropping to the floor.
2) Just in case of oil dropping to the floor, when disassembling the waste oil container, place a cloth,
paper, or oil dish on the floor.
Caution
40
Cleaning Section Frequency
Every day
Every seven days
Table
Waste Oil
Container