6-1-4) Hook Setting; 6-1-5) Supply Device Position Adjustment - SunStar SJS/A-BA2 User Manual

Direct-drive, automatic 2-needle belt loop sewing machine

Hide thumbs Also See for SJS/A-BA2:

Table of Contents

6.1.4) Hook setting

Move the position of the sensor that detects the base

separation and maintain the grounding distance at 1mm.

6.1.5) Supply Device Position Adjustment

1) Loosen the sensor plate fixing lever that fixes the

sensor plate. Use the jig handle for moving the slide

plate and Set No. 1 finger to be in the same position

as the presser foot.

2) Loosen the finger fixing screw and adjust No. 2

finger to be in the same position as the presser foot.

3) Use the sliding device to move the supplying device

base and overlap the cutting device and the closely

linked belt loop rotary finger with the needle plate

hole. And then conduct the manual testing for the

stable placement of the sewing fabric.

Fixing lever

Sensor

Handle

Table of Contents