Safety Precautions; Identification Of Parts; Fuel - Texas A/S HSL265 User Manual

Table of Contents
Illustrations ................................................................... 2
Warning symbols .......................................................... 4
Safety precautions ....................................................... 8
Identification of parts .................................................... 8
Fuel .............................................................................. 8
Filling of gasoline ......................................................... 9
Start/Stop ..................................................................... 9
Recommendations for trimming ................................... 9
Rotation of handle ........................................................ 9
Maintenance ................................................................. 9
Spark plug .................................................................. 10
Storage....................................................................... 10
Thank you for choosing our Texas hedge trimmer.
This manual informs you of the use and
maintenance of your hedge-trimmer to ensure that
you benefit the most from using it. Your local dealer
will be ready to give you advice and will be happy to
answer any questions you might have to this
manual.
Spare parts
Part list and explosive drawings for the
specific product, can be found on our
website www.texas.dk
If you help find part numbers yourself, it
will ease the service.
For purchase of spare parts, please
contact your dealer.

Safety precautions

Read this user manual
carefully to understand how to
operate the machine properly.
Never wear loose fitting clothes when
working the machine. Always use
protective glasses and gloves.
Make sure that any spectators are
more than 5 meters from the place
where you use the machine.
Start the machine on solid ground with an
even surface.
Hold both handles on the handles all times
when using the machine.
Make sure to stand steady with both feet and
your body in balance during work.
Keep the machine away from your body
when you start it and work with it.
Do not touch the knives with your hands
once the machine is started.
Never attempt to remove objects that
are stuck in the knives without
stopping the engine and removing the
spark cable first.
Always stop the engine when not
trimming and keep the exhaust away
from your body when carrying the
machine.
Only fill fuel outdoors. Wipe away any fuel
spilled before starting the engine. Be at a
distance of more than 3 meters from the
fuel container and the place of fueling
before starting the engine. Never add fuel
to a hot engine. Wait until it is cold.
The exhaust should not get
close to dry grass or any other
lightly lit material. Always keep
the exhaust away from your
body.
Never touch the spark plug when starting the
machine or working with it.
While working with the machine
you should be observant of
objects that may damage the
knives such as wire, fences or
poles.
Never use the machine indoors.

Identification of parts

Fig 1
1. Throttle lever
2. Start / stop
3. Starter
4. Handle
5. Hand protection
6. Knife protection
7. Knife
8. Fuel tank
9. Release handle
10. Choke
11. Fuel primer
12. Lock handle or rotation

Fuel

Fig 9-10
•
This product is equipped with a two-stroke
engine.
•
Always use unleaded fuel (octane 95).
•
Never use already mixed petrol/oil
from gas stations that is normally
used for mopeds, motorcycles
i.e.Always follow the directions
from the supplier of the oil
regarding the mix petrol.
•
Use a clean and approved gasoline can for
mixing the oil with the petrol.
•
Use an approved two-stroke oil for air cooled
8