Advertisement
Quick Links
Operation Manual
Air Impact Wrench
61900
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61900
Summary of Contents for WilTec 61900
- Page 1 Operation Manual Air Impact Wrench 61900 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Do not use this device if you are tired, inattentive or under the influence of alcohol, drugs or medica- tion. A moment of inattention when using the electric device can result in serious accidents and injur- ies. © by WilTec Wildanger Technik GmbH Item 61900 Page 3 http://www.WilTec.de...
- Page 4 Always wear safety goggles and a face shield. If there are any leaks or other malfunctions, immediately disconnect the unit from the com- pressed air source and correct the malfunction. © by WilTec Wildanger Technik GmbH Item 61900 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 This may lead to malfunctions of the device. Install an air filter and oiler between the compressor and the tool. Use a compressor with 3 hp or more for each tool. © by WilTec Wildanger Technik GmbH Item 61900 Page 5 http://www.WilTec.de...
- Page 6 Make sure that the direction of rotation is correct before operating the tool. The letter “F” indicates for- ward rotation, the letter “R” indicates reverse rotation. Forward rotation always refers to a clockwise ro- tation from the point of view from operator. © by WilTec Wildanger Technik GmbH Item 61900 Page 6 http://www.WilTec.de...
- Page 7 Do not store the device in a place with high humidity. If the tool is stored immediately after use, resid - ual moisture inside the tool can lead to rust formation. Before storage and after operation, oil the tool at the air inlet with spindle oil and operate it briefly. © by WilTec Wildanger Technik GmbH Item 61900 Page 7 http://www.WilTec.de...
- Page 8 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.