Table of Contents
Advertisement
Quick Links
Operation Manual
Air Impact Wrench
ARTICLE 61900 / 550A
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 13
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Table of Contents
Related Manuals for WilTec 95L
Summary of Contents for WilTec 95L
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 13 http://www.WilTec.de http://www.aoyue.eu...
- Page 2 Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram. Although WilTec Wildanger Technik GmbH has made every effort to make sure that this user manual is complete, accurate and updated, errors cannot always be avoided. In the event of problems with this user manual please complete and send this form back to us.
-
Page 3: General Safety Rules
3) Rotating drive sockets and drive extensions can easily entangle rubber-coated or metal-reinforced gloves. 4) Do not wear loose-fittings gloves with cut or frayed fingers. 5) Never hold the drive, socket or drive extension. 6) Keep hands away from rotating devices. © by WilTec Wildanger Technik GmbH Seite 15 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 4: Operating Hazards
3) Use only sizes and types of accessories and consumables that are recommended by the manu- facturer. Do not use other types than defined by the manufacturer. 4) Only use sockets that are in good condition. Sockets in poor condition can shatter and become projectiles. © by WilTec Wildanger Technik GmbH Seite 16 http://www.WilTec.de http://www.aoyue.eu... -
Page 5: Workplace Hazards
1) Exposure to vibration can cause disabling damage to the nerves and blood supply of the hands and arms. 2) Keep the hands away from the nut-runner sockets. 3) Wear warm clothing when working in cold conditions and keep your hands warm and dry. © by WilTec Wildanger Technik GmbH Seite 17 http://www.WilTec.de http://www.aoyue.eu... - Page 6 8) Do not exceed the maximum air pressure stated on the tool. 9) Never carry an air tool by the hose. © by WilTec Wildanger Technik GmbH Seite 18 http://www.WilTec.de http://www.aoyue.eu...
-
Page 7: Technical Data
(3/8”) 2800 9000 12.7 mm (1/2”) 12.7 mm 3600 7500 (1/2”) 12.7 mm 3900 8000 (1/2”) Emission values (A) noise according to EN ISO 15744. See “Technical Data” table. © by WilTec Wildanger Technik GmbH Seite 19 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 8: Product Description
CAUTIONS AIR PRESSURE Maximum performance is reached at the proper speed, obtainable at a gauge pressure of (xx) bar – see technical data table. © by WilTec Wildanger Technik GmbH Seite 20 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 9 Wear proper eye protection, ear-muffs, mouth-muffle and gloves at all times when operating this tool to minimize risks of injury. The working place must be well ventilated. Release the on/off switch in case of energy supply failure. © by WilTec Wildanger Technik GmbH Seite 21 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 10: Operation
Avoid storing the tool in a location with a high humidity. If the tool is stored immediately after use, residual moisture inside the tool can cause rust. Before storing and after operation, oil the tool at the air inlet with spindle oil and run it for a short time. © by WilTec Wildanger Technik GmbH Seite 22 http://www.WilTec.de http://www.aoyue.eu...