Blind Spot Information System - Honda ODYSSEY 2020 Owner's Manual

DRIVING
Stage 1: Visual and audible warning.
Stage 2: Visual and audible warning, light brake application.
Stage 3: Visual and audible warning, strong brake application.
Changing Settings
n
Determine the warning timing. The vehicle must be in Park (P).
1. Select HOME, then select Settings.
2. Select Vehicle.
3. Select Driver Assist System Setup.
4. Select Forward Collision Warning Distance.
5. Select from the options.
Turning the System On or Off
n
™
The CMBS is turned on every time you
start the engine, even if you turned it off
the last time you drove the vehicle.
Press and hold the button until the
beeper sounds to switch the system on
™
or off. When the CMBS is off:
™
• The CMBS indicator in the instrument panel comes on.
• A message on the driver information interface reminds you that the
system is off.
Important Safety Reminder
n
CMBS is designed to reduce the severity of an unavoidable collision. It does
not prevent collisions nor stop the vehicle automatically. It is still your
responsibility to operate the brake pedal and steering wheel appropriately
according to the driving conditions.
152 |
*1

Blind Spot Information System

Alerts you to a detected vehicle in your left or right blind spot while driving
between 20 mph (32 km/h) and 100 mph (160 km/h). When the system detects
vehicles approaching from behind in adjacent lanes, the appropriate indicator
comes on for a few seconds, providing assistance when you change lanes.
Blind Spot Information System Alert Indicator comes on when:
• A vehicle enters the alert zone from behind to overtake you with a speed
difference of no more than 31 mph (50 km/h) from your vehicle.
• You pass a vehicle with a speed difference of no more than 12 mph (20 km/h).
Blinks and the beeper sounds when:
You move the turn signal lever in the
direction of the detected vehicle. The
beeper sounds three times.
Changing Settings
n
Determine the warning type or turn the system off. The vehicle must be in
Park (P).
1. Select HOME, then select Settings.
2. Select Vehicle.
3. Select Driver Assist System Setup.
4. Select Blind Spot Information.
5. Select an alert type or turn the system off.
DRIVING
*1 - If equipped
| 153