Switching To Standard Cruise Control; Important Safety Reminder - Honda ODYSSEY 2020 Owner's Manual

Hide thumbs Also See for ODYSSEY 2020:
Table of Contents

Advertisement

DRIVING
After cruise control has been canceled, you can still resume the prior set
speed by pressing the RES/+ switch.
Improper use of ACC can lead to a crash.
Use ACC only when driving on expressways or freeways and in good
weather conditions.
ACC has limited braking capability.
When your vehicle speed drops below 22 mph (35 km/h), ACC will
automatically cancel and no longer will apply your vehicle's brakes.
Always be prepared to apply the brake pedal when conditions require.

Switching to Standard Cruise Control

n
Press and hold the Interval button for one second.
Cruise Mode Selected appears in the
driver information interface for two
seconds, and then the mode switches
to Cruise.
To switch back to ACC, press and hold
the interval button again for one
second. ACC Mode Selected appears
on the driver information interface for
two seconds.

Important Safety Reminder

n
As with any system, there are limits to ACC. Use the brake pedal whenever
necessary, and always keep a safe interval between your vehicle and other
vehicles.
146 |
Lane Keeping Assist System (LKAS)
Provides steering input to help keep the vehicle in the middle of a detected lane
and provides audible and visual alerts if the vehicle is detected drifting out of its
lane while driving between 45–90 mph (72–145 km/h).
A camera mounted between the windshield and the rearview mirror determines
if your vehicle begins to move away from the center of a detected lane while
driving between 45–90 mph (72–145 km/h).
If you cross a detected lane line without using your turn signal, a message
appears on the DII and the steering vibrates slightly.
DRIVING
*1
*1 - If equipped
| 147

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents