Activating And Setting The Vehicle Speed; Adjusting The Vehicle Speed; Canceling Cruise Control - Honda ODYSSEY 2020 Owner's Manual

DRIVING

Activating and Setting the Vehicle Speed

n
1. Press the CRUISE button. The
CRUISE MAIN indicator appears.
2. Accelerate to the desired speed
(above 25 mph/ 40 km/h). Take your
foot off the pedal and press the
-/SET button to set the speed. The
CRUISE CONTROL indicator
appears.

Adjusting the Vehicle Speed

n
Increase or decrease the vehicle speed using the RES/+ or SET/– button on
the steering wheel.
• Each time you press the RES/+ or
–/SET button, the vehicle speed is
increased or decreased by about 1
mph or 1 km/h accordingly.
• If you press and hold the RES/+ or
–/SET button, the vehicle speed
increases or decreases by about 5
mph or 5 km/h accordingly.
142 |

Canceling Cruise Control

n
Press the CANCEL button, the MAIN
button or the brake pedal. The CRUISE
CONTROL indicator goes off.
After cruise control has been canceled,
you can still resume the prior set speed
by pressing the RES/+ button while
driving at a speed of at least 25 mph (40
km/h).
Press CRUISE to turn the system off.
Improper use of cruise control can lead to a crash. Use cruise control only
when traveling on open highways in good weather.
*1
Adaptive Cruise Control (ACC)
Helps maintain a constant vehicle speed and a set following interval behind a
vehicle detected ahead of yours and, if the detected vehicle comes to a stop,
can decelerate and stop your vehicle, without you having to keep your foot on
the brake or the accelerator. When ACC slows your vehicle by applying the
brakes, your vehicle's brake lights will illuminate.
ACC cannot be activated if Intelligent Traction Management setting is snow.
DRIVING
*1 - If equipped
| 143