Adjusting The Head Restraints; Storing A Position In Memory - Honda ODYSSEY 2020 Owner's Manual

VEHICLE CONTROLS

Storing a Position in Memory

n
1. Set the power mode to ON. Adjust
the driver's seat and mirrors to the
desired position.
2. Press the SET button.
You will hear a beep, and the
memory button indicator light will
blink.
3. Press and hold memory button 1 or 2
within 5 seconds of pressing the
SET button.
You will hear two beeps, and the indicator light on the button you
pressed stays on once the seat, the steering wheel, and the outside
mirror positions have been memorized.

Adjusting the Head Restraints

Your vehicle is equipped with head
restraints in all seating positions. Head
restraints are most effective for protection
against whiplash and other rear-impact
crash injuries when the center of the back
of the occupant's head rests against the
center of the restraint. The tops of the
occupant's ears should be level with the
center height of the restraint.
For a head restraint system to work properly:
• Do not hang any items on the head restraints or from the restraint legs.
• Do not place any objects between an occupant and the seat-back.
• Install each restraint in its proper location.
Improperly positioning head restraints reduces their effectiveness and
increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before driving.
60 |
Adjusting the Front and Second Row Outer and Third Row Outer Head Restraints
n
Positions
To raise: Pull it upward.
To lower: Push it down while pressing the release button.
*1
Changing the Second Row /Third Row Center Seat Head Restraint Positions
n
To raise: Pull it upward.
To lower: Push it down while pressing the release button.
VEHICLE CONTROLS
*1 - If equipped
| 61