Table of Contents
Advertisement
DRIVING
Important Safety Reminder
n
The RDM system has limitations. Over-reliance on it may result in a
collision. It is always your responsibility to keep your vehicle within the
driving lane.
Traffic Sign Recognition System
Reminds you of road sign information, such as the current speed limit your
vehicle has just passed through, showing it on the driver information interface.
How the System Works:
When the camera located behind the rearview mirror captures traffic signs
while driving, the system displays the ones that are recognized as designated
for your vehicle. The sign icon will be displayed until the vehicle reaches a
predetermined time and distance.
Limitations:
• Headlight lenses are dirty or the headlights are not properly adjusted.
• The outside of the windshield is blocked by dirt, mud, leaves, wet snow, etc.
• The inside of the windshield is fogged.
• There are portions remaining to be wiped.
Collision Mitigation Braking System
Can assist you when there is a possibility of
your vehicle colliding with a vehicle or a
pedestrian detected in front of yours. The
™
CMBS
is designed to alert you when a
potential collision is determined, as well as
to reduce your vehicle speed to help
minimize collision severity when a collision is deemed unavoidable.
110 |
™
™
(CMBS
)
Alert Stages
n
The system has three alert stages for a possible collision. Depending on the
™
circumstances or CMBS
settings, CMBS
stages before initiating the last stage.
Stage 1:
Visual and audible warning.
Stage 2:
Visual and audible warning, light brake application.
Stage 3:
Visual and audible warning, strong brake application.
Changing Settings
n
1. From the HOME screen, select Settings.
2. Select Vehicle Settings. Then select Driver Assist.
3. Select Forward Collision Warning Distance.
Turning the System On or Off
n
™
When you turn the CMBS
on and off, do the following.
1. Press the safety support switch.
2. Roll the left selector wheel to the
™
CMBS
symbol and select it.
A beep sounds and a message
appears in the Driver Information
Interface.
Important Safety Reminder
n
CMBS is designed to reduce the severity of an unavoidable collision. It does
not prevent collisions nor stop the vehicle automatically. It is still your
responsibility to operate the brake pedal and steering wheel appropriately
according to the driving conditions.
*1
Blind Spot Information System
Alerts you to a detected vehicle in your left or right blind spot while driving
between 20 mph (32 km/h) and 100 mph (160 km/h). When the system detects
vehicles approaching from behind in adjacent lanes, the appropriate indicator
comes on for a few seconds, providing assistance when you change lanes.
DRIVING
™
may not go through all of the
*1 - If equipped
| 111
Advertisement
Table of Contents
