4.1
Handpiece Installation and Disassemble
1) Insert handpiece stand into A (Picture 4.1-1);
2) You will hear the sound, which means it is fixed well on the equipment;
3) Disassemble: Pull the handle(Picture 4.1-2), at the same time, take out the handpiece
stand;
4) The stand installation and disassemble of the two sides are the same.
4.2
Fast Connector Installation and Disassemble
1) Insert the fast connector into the hole (Picture 4.2-1);
2) Fix the nut (Picture 4.2-2);
6//22
Chapter 4 Installation
Picture 4.1-1
Picture 4.2-1
Picture 4.1-2
Picture 4.2-2
All rights reserved