Chapter 6 Maintenance; Daily Maintenance - MBT Vaca Shape User Manual

Turn off the equipment and 5 minutes later you can maintenance this equipment.
Never leave the equipment with cover open and no personal care, or there will be danger to personnel or
system.
The maintenance of inner parts of the equipment shall be carried out by professional technical persons.

6.1 Daily Maintenance

1. Maintenance of handpiece 1, handpiece 2 and handpiece 3
Wipe the tip directly.
2. Clean the filter element of handpiece 1
After each treatment, take out the filter element and clean it;
In Picture 6.1-1, A is filter element extractor, B is filter element.
Procedure:
1) Insert filter element extractor into the filter element as Picture 6.1-2 shows;
Then take out the filter element;
2) Open the cover of the filter element with the extractor (Picture 6.1-3);
3) Clean the case and cover with water (Picture 6.1-4);
4) After cleaning, assemble the case and cover.
5) Make the cotton dip 70% alcohol solution and use it to wipe the filter element slot in handpece 1;
6）Put the filter element into the slot.
A
Picture 6.1-1
3. Clean handpiece 4
1) Slightly turn the tip and take it down;
Then tip contains A and B (Picture 6.1-5);
2) Clean A and B with water;
3) Wipe A and B with soft paper;
16//22

Chapter 6 Maintenance

B
Picture 6.1-3
Picture 6.1-2
Picture 6.1-4
All rights reserved