Handpiece 2 And Handpiece 3 - MBT Vaca Shape User Manual

5) F area shows its available treatment parts. Touch the picture you want and the treatment manner will
be showed at B area;
6) G area adopts countdown. Press
7) D area shows timing function of IC card.
Issue a user card referring to 5.5.1;
Insert user card into the card slot and then the timing function is started;
The D area will show the user card time (0-99900 minutes);
If user card function is started, user card has to be inserted when you use this equipment;
To stop timing function of IC card:
Issue a unlock card referring to 5.5.2;
Make unlock card touch response area of the equipment;

5.3 Handpiece 2 and Handpiece 3

Handpiece 2 Handpiece 3
The function and working mechanism of the two handpiece are the same.
Handpiece 2 is bipolar cavitation and handpiece 3 is monopolar cavitation.
Handpiece 2 is suitable for bigger part and handpiece 3 is suitable for smaller part.
In Picture 5.3-1:
a) Press "+", "-" key to adjust energy level（B, C） ；D shows the energy level;
b) Press "○" key to get ready for treatment（A） ；
c) You can also adjust cavitation energy level on the host screen;
d) Parameters could not be adjusted during ready;
10//22
or to adjust time;
Standby/Read
Picture 5.3-1
"+", "-" key
All rights reserved