MBT Vaca Shape User Manual page 13

I
A
C
Picture 5.3-2
In Picture 5.3-2:
System will check online for handpiece connection. Touch the handpiece you want in A area;
F area: Touch treatment item in F area, for example,
area will show relative treatment manner (Picture 5.3-3).
C area:
When the equipment is ready, the indicator light of handpiece 1 will shine.
Temperature < 50℃, the light shows yellow;
Temperature >50℃, the light shows red;
Temperature >60℃, the handpiece stops working;
Monopolar cavitaiton is 10-50W; bipolar cavitation is 10-60W.
You can adjust cavitation energy level by handpiece key too.
E area: Press
F area: shows its available treatment parts. Touch the picture you want and the treatment manner will be
showed at B area;
G area: adopts countdown. Press
D area: shows timing function of IC card.
Issue a user card referring to 5.6.1;
Insert user card into the card slot and then the timing function is started;
The D area will show the user card time (0-99900 minutes);
If user card function is started, user card has to be inserted when you use this equipment;
To stop timing function of IC card:
Issue a unlock card referring to 5.6.2;
Make unlock card touch response area of the equipment;
11//22
B
F
shows temperature of handpiece 2 or handpiece 3.
shows cavitation energy level.
to change to
D
E
G
will change to
situation
or to adjust time;
Picture 5.3-3
. At the same time, B
All rights reserved