Handpiece 4 - MBT Vaca Shape User Manual

5.4 Handpiece 4

In Picture 5.4-1:
A: "-" key B: "o" key
Press "+""-" key to adjust vacuum（A ,C） ；
Then press "o"（B） to be ready for treatment；
You can adjust it on the host screen;
Parameters could not be adjusted during ready;
I
I
A
B
C
Picture 5.4-2
In Picture 5.4-2:
System will check online for handpiece connection.
I area: touch the handpiece you want. A is big tip; B is small tip;
E area: Press
F area: shows its available treatment parts. Touch the picture you want and the treatment manner will be
showed at J area (Picture 5.4-3);
G area adopts countdown. Press
D area shows timing function of IC card.
Issue a user card referring to 5.6.1;
Insert user card into the card slot and then the timing function is started;
The D area will show the user card time (0-99900 minutes);
If user card function is started, user card has to be inserted when you use this equipment;
To stop timing function of IC card:
Issue a unlock card referring to 5.6.2;
12//22
A
C
C: "+" key
J
F
to change to
or
B
Picture 5.4-1
D
D
E
G
situation
to adjust time;
Picture 5.4-3
All rights reserved