Product Information - BenQ LU951ST User Manual & Installation Manual

Product information

Shipping contents
Projector
Specifications
Display system
Resolution
Light source
Throw ratio
Power consumption
Dimensions
Weight
Control terminals
• WIRED REMOTE
For connection to a wired remote control.
• RS232
Standard 9-pin D-sub interface for connection to PC
control system and projector maintenance.
• USB MINI-B
For firmware upgrade only.
• USB TYPE A
Support 5V/2A output.
• LAN
For connection to RJ45 Cat5/Cat6 Ethernet cable to
control the projector through a network.
• HDBaseT
For connection to RJ45 Cat5/Cat6 cable to input
uncompressed high-definition video (HD).
• HDMI 2
Connection to HDMI source.
6
Remote control and
batteries
LU950/LU951
1-CHIP DMD
1920 (H) x 1200 (V) WUXGA
Laser diode
1.36 ~ 2.18
530 W (Max); < 0.5 W (Standby)
490 mm (W) x 159 mm (H) x 380 mm (D)
9.4 Kg (20.7 lbs)
• HDMI 1
• VIDEO
• S-VIDEO
• AUDIO IN L/R
• PC IN
• MONITOR OUT
• AUDIO IN
Installation guide
LU951ST
0.81 ~ 0.89
Connection to HDMI source.
Connection to composite video source.
Connection to S-Video source.
Connection to an audio input source via an audio or
audio L/R cable.
15-pin VGA port for connection to RGB source or PC.
Connection to other display equipment for concurrent
playback display. (Used with PC IN port.)
Connection to an audio input source via an audio cable.
(Used with PC IN port.)
Power cord