Electrical Wiring - Outdoor Unit - Gree 13-05020 Owner's Manual

INSTALLATION INSTRUCTIONS

ELECTRICAL WIRING - OUTDOOR UNIT

• Open the cover of outdoor unit.
• Make the wire connections according to the following instructions.
1.Remove the big handle
2.Remove the wire clamp and connect the end of the power connection cord with screws
to the wiring terminal board. Make sure that the wiring connection is in accordance with
the indoor unit (wire colors and numbers).
3.Make sure that the wiring has been connected securely.
4.Reinstall the big handle.
1. Wiring should be properly installed.
2. Tighten the screws on the terminal board.
3. Pull on each wire and make sure they are solidly in place.
4. Wrong wiring will cause unit to work abnormally and/or damage the unit.
5. Wrong wire grounding may cause short circuit.
3-way terminal board
115 V / 1 ph / 60Hz
Blue
Black
6-way terminal board
Brown
Power supply
IMPORTANT NOTICE
18
Ground circuit
of indoor unit
Ground circuit
of outdoor unit
Yellow-green
Ground
Power
connection