Page 3
User manual LAM1216 Dear Customer, Congratulations on your choice of hob. The user manual will help you use your product quickly and safely. • Please read this user manual before installing and using the hob. • Always follow the safety instructions.
LAMONA Appliances Index 01 - Before using the hob 02 - Safety General safety Electrical safety Product safety 07-08 Intended use Safety for children 03 - Using your hob Controls Hob layout 04 - Cleaning and maintenance How to clean your hob...
User manual LAM1216 01 - Before using the hob • Make sure that you have removed all packaging, wrappings, stickers and films from the hob surface. • It is recommended that you clean and wash the hob surface before using for the first time (see p11).
LAMONA Appliances • Do not operate the product • The product must be if it is defective or has any disconnected during visible damage. installation, maintenance, • Ensure that the product cleaning and repairing function knobs are switched procedures. o after every use.
User manual LAM1216 to clean the appliance as this is compatible with the may cause an electric shock. product. To do this, turn o WARNING: Unattended the fuse at home. cooking on a hob with fat or oil can be dangerous and Product Safety may result in fire.
LAMONA Appliances The use of inappropriate • The packaging materials guards can cause accidents. will be dangerous for Prevention against possible children. Keep the packaging fire risk! materials away from • Ensure all electrical children. Please dispose of connections are secure and all parts of the packaging tight to prevent risk of arcing.
User manual LAM1216 03 - Using the hob Do not use the hob if the surface is cracked, as electrical parts are directly beneath. Switch o the appliance at the supply to prevent electric shock and contact your supplier. The hob surface remains hot after use.
LAMONA Appliances Hob layout Rear right control Knob Rear Left Zone (Rapid) Ø145mm 1500w Suitable for 6” or 15cm diameter saucepan Rear left control Knob Rear Right Zone (Standard) Ø180mm 1500w Suitable for 7” or 18cm diameter saucepan Front left control Knob Front right control Knob Front Left Zone (Rapid) Ø180mm 2000w...
User manual LAM1216 04 - Cleaning & maintenance How to clean your hob • Switch plates o and let cool. If necessary, • Wipe any spillage as soon as possible after treat plates with a cleaning agent (cleaner/ the hob has cooled.
LAMONA Appliances Clearances and dimensions requirements Minimum distance between carcasses must be equal to width of hob 400mm min 55mm min 50mm min between hob and rear wall 560mm (>60mm to cut out aperture) 490mm 50mm Min Minimum height to extractor...
Page 13
User manual LAM1216 Worktop Worktop 15mm 25mm oven or partition oven or partition WARNING RISK OF FIRE The putty seal must be fitted to reduce the heat transfer between the hob surface and the worktop. Failure may result in damage to the worktop and invalidate your guarantee.
LAMONA Appliances Electrical connections IMPORTANT: Ensure that the electricity supply is switched off before connecting. Your extractor is intended for permanent installation. Your appliance must be connected to fixed wiring via the use of a double pole switched fused spur outlet with at least 3mm contact separation. The isolation switch must be accessible after installation (see technical data for fuse rating).
User manual LAM1216 The appliance must be connected to the mains supply only by a competent person. The mains lead must not be clamped, bent, trapped, or come into contact with hot parts of the appliance. If the mains lead is damaged, it must be replaced by a qualified person (mains cable must not be longer than 2m for safety reasons).
Call the Depot number on your Proof of Purchase Document supplied with the product / kitchen. Call the LAMONA Service Line on 0344 460 0006 * Product installed within a domestic kitchen or non-domestic kitchen where 8 or fewer people are using the appliance.
Page 20
Product serial number (Place sticker here) Issue v2 140119 185.9282.21/R.AA/24/01/2019...
Need help?
Do you have a question about the LAM1216 and is the answer not in the manual?
Questions and answers