Table of Contents
Advertisement
in systems where the Ethernet signals remain within a system on a backplane and do not go
out of the system on a cable. If it becomes necessary to have one or more ports of the
ZX244L attached to a cable, then you also need to use the ZX244T. Contact your ZNYX
Networks Sales Representative for additional design constraints regarding the ZX244L for
both internal and external Ethernet ports.
Getting Started
You will find the PMC ZX240 adapters are simple to install and configure. This document provides
instructions for completing the hardware installation process. Troubleshooting and diagnostic
sections are also included. There are two basic steps required before you can begin using the
adapter:
Step 1
Install the hardware (follow the instructions in this manual).
Step 2
Install the software driver (download from the ZNYX web site).
About this Manual
This manual includes the installation, troubleshooting, and reference data for the ZX240 Series
Ethernet adapter. See the ZNYX Networks data sheet for product specifications.
All documentation for ZNYX Networks products, including data sheets, release notes and user
guides are available for downloading from the ZNYX Networks web site (www.znyx.com). Files
are supplied in PDF format so your system requires Adobe Acrobat Reader to open and read the
documentation (www.adobe.com).
For help configuring an application-specific driver, download the appropriate driver user guide.
Driver Installation
After you have successfully secured your adapter to the system, you can install and configure the
driver (see separate documentation). All Ethernet cables should be attached. See the Hardware
Installation section in this manual for further cable requirements.
Download the specific driver and applicable release notes for your system from the ZNYX
Networks web site (www.znyx.com).
Technical Support
If you have difficulty downloading a driver or need further assistance after reading this user manual,
the ZNYX Networks professional technical support team is available to answer your questions.
Contact us at:
Telephone:
Fax:
Email:
Web site:
ZX240 Series User Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(510) 249-0800 or (800) 724-0911
(510) 656-2460
support@znyx.com
www.znyx.com
Page 4
Advertisement
Table of Contents
Troubleshooting
