Fast ethernet adapter with rear i/o for pci mezzanine connector (pmc) (14 pages)
Summary of Contents for ZNYX ZX340Q SERIES
Page 1
ZX340Q S ERIES UIDE Fast Ethernet Adapters for PCI Systems...
Page 2
ZNYX Networks may have patents, pending patent applications, trademarks, copyrights or other intellectual property rights covered in the subject matter of this document. By furnishing this document, ZNYX Networks does not license nor waive its license to those intellectual property rights except as expressly provided in a written license agreement from ZNYX Networks.
ABOUT THIS MANUAL This manual includes the installation, troubleshooting, and reference data for the ZX340Q Series Ethernet adapters. See the ZNYX Networks data sheet for product specifications. All documentation for ZNYX Networks products, including data sheets, release notes and user guides are available for downloading from the ZNYX Networks web site (www.znyx.com).
Each connector independently supports either 10BaseT, 10BaseT Full Duplex, 100BaseTX, or 100BaseTX Full Duplex. All these network media types are used with the same Category 5 four-conductor twisted pair cable. Category 3 cable may be used with ZX340Q Series User Guide Page 4...
Page 5
1 to pin 1, pin 2 to pin 2, etc. Pins 4, 5, 7 and 8 straight cable are not used. The wiring for a crossover (or null) cable is shown in the table below. RJ45 ZX340Q Series User Guide Notes Do not plug into a port marked "uplink" or MDI.
Page 6
It will attempt to make connections in the following order. 1. 100 Mbps, Full Duplex 2. 100 Mbps, Half Duplex 3. 10 Mbps, Full Duplex 4. 10 Mbps, Half Duplex If none of the above works, no link will be established. ZX340Q Series User Guide Page 6...
For example, if your four-channel NetBlaster ZX346Q is on bus 1, the device numbers may be 4, 5, 6 and 7. To test all four channels, your commands would be: diag346q 1 4 diag346q 1 5 ZX340Q Series User Guide Diagnostic Program Type This diag345.exe diag345 list diag345q.exe...
Try another network cable. A faulty cable is common. Try a different network port on the network switch or hub. Refer to your operating system documentation to correct any error messages or logs when the adapter's driver is being loaded. ZX340Q Series User Guide Page 8...
Cet appareil numeriqué de la classe A est conforme à la norme NMB-003 du Canada. CE Conformity: The ZX340Q Series is in compliance to CE testing according to the following standards with respect to the stated level and given criteria:...
ZNYX Networks or its authorized dealer. In order for this warranty to be valid, this hardware product must remain in its original system and be registered with ZNYX Networks within one year of purchase.