Removing & Installing Body Components; Battery - Honda CB1000RA Manual

Removing & Installing Body Components

Battery

Negative terminal
Positive terminal
Rubber strap
#
Make sure the ignition switch is in the OFF
position.
1.
2.
Battery 3.
4.
5.
#
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
Removal
Remove the front seat.
Unhook the rubber strap from right side.
Disconnect the negative - terminal from
the battery.
Disconnect the positive + terminal from
the battery.
Remove the battery taking care not to
drop the terminal nuts.
Installation
2
P. 94
2
P. 35
2
P. 81
2
P. 135
93