Starting Up; Connecting - Barco EOS X Terminal User Manual

3.3 Starting Up

3.3.1 Connecting

First of all you have to provide the appropriate power supply. Plug in the power cables on the back panel of your
E . Please, refer to section
OS
Mouse and keyboard must be connected to the respective sockets on the rear of E
3.2.2 Mouse and 3.2.3 Keyboard!
If necessary, connect the E
Connect the graphic cards to the O
cards or O S . At least one display must be connected for administrating E
MNI CALERS
cards and 3.2.6 OmniScaler! Connect the video and RGB sources to the video-input cards of E
Quad Analog Video Card, 3.2.8 Streaming Video Card
Connect your E to the local area network! Connect the network to the appropriate port of the network card or
OS
to the network onboard adapter! Please, refer to
For configuring a distributed system, the central unit must be connected to a monitor. Refer
to section
the O V
VER IEW
Distributed system, please!
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
3.2.1 Power supply!
E to E . Please, refer to
OS XTENDERS OS
S , if O
MNI CALERS
and
3.2.5 Graphic cards, please! Connect the rendering machines with the central E
P
modules or V LUS ' with the rendering machines. Refer to section
ISU
3.2.11 Eos Extender!
S are used. Connect the display devices to the graphic
MNI CALERS
3.2.9 Dual RGB Input Card!
3.2.12 Network!
___________________________________________________________________
3. Getting started
. Please, refer to sections
OS
. Please, refer to 3.2.5 Graphic
OS
. Please, refer to
OS
OS
3.2.13
3.2.7
and
3-33