Table of Contents
Advertisement
3. Getting started
3.3 Starting Up
3.3.1 Connecting
First of all you have to provide the appropriate power supply. Plug in the power cable on the back panel of your
H
C
. Please, refer to section
3.2.1 Power
supply!
YDRA
OMPACT
Connect your H
C
to the local area network! Connect the network to the Ethernet connector of the
YDRA
OMPACT
single board computer! Please, refer to section
3.2.2 Single board
computer!
Connect your video sources to the video input cards and the RGB sources to the RGB input cards, if advisable use
the patch panel. Please, refer to section
3.2.4 Video Input
Card,
3.2.5 RGB Input Card
and
3.2.9 Patch
panel!
Connect the intended display devices to the output card. Please, refer to section
3.2.6 Output
Card!
If necessary, connect the audio sources to the digital and analog audio daughter boards. Please, refer to section
3.2.7 Audio Board
and
3.2.8
Parthenope!
__________________________________________________________________________________________________
Barco – Hydra Compact – R5976568 – Revision 12 – May-2005
3-23
Advertisement
Table of Contents
