Barco EOS X Terminal User Manual page 67

For each rendering machine a unique IP address within the specified sub-net must be provided. In addition the
Ethernet addresses of the rendering machines' network cards must be entered. The Ethernet address is printed
on a label on the network card. For example:
EA=00.60.97.78.29.0a
As well the Ethernet address can be read from the output during the boot process.
Enter number of graphic engines [2]: 2
IP address for engine 1 [192.168.149.1]: 192.168.60.1
Ethernet address for engine 1 [00.00.00.00.00.00]: 00.60.08.a6.a9.58
Screen arrangement for engine 1 (Width x Height) [2x4]: 4x2
Position for engine 1 (X,Y) [0,0]: 0,0
IP address for engine 2 [192.168.149.2]: 192.168.60.2
Ethernet address for engine 2 [00.00.00.00.00.00]: 00.60.08.a6.a9.73
Screen arrangement for engine 2 (Width x Height) [2x4]: 4x2
Position for engine 2 (X,Y) [0,0]: 4,0
The script lists your settings. Examine the values and confirm them by entering y , or enter n for repeating the
previous installation steps.
These are your Distributed Server settings
==========================================
- Core machine's second IP:
- Engines Netmask Address:
- NIC card:
- Number engines :
- Values for engine 1:
- Values for engine 2:
Everything correct? (yes/no)? [yes]: y
Channel reordering
For some installations it is useful to change the order of the projection channels. This can be assigned in the
Channel Reordering section. If you want to reorder the projection channels enter y . By entering n this section will
be skipped.
X Server's Channel Reordering
=============================
This is the reordering configuration part of the X Server.
It offers the possibility to define the reordering channels section.
The channels section defines the assignment of graphic channels
to projection channels.
Please read the section "X Server Configuration" in the
User's Manual "Eos X Terminal"
Do you want to proceed (yes/no)? [no]: y
The order can be changed only within the rendering machines (graphic engines). First the engine has to be indi-
cated then the graphic channels (default) and the projection channels (new) can be entered. The correlation
between graphic channels and projection channels is explained in section
Please have a look there to have a further explanation.
Channel Reordering for the Distributed X Server
===============================================
Assign to a default graphic channel within a
graphic engine a new position in the
Display Wall
Enter graphic engine's number for reordering[1]: 1
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
192.168.149.254
255.255.255.0
100 Mbit
2
IP = 192.168.149.1 Ether = 00.60.08.a6.a9.58
arrangement = 4x2 position = 0,0
IP = 192.168.149.2 Ether = 00.60.08.a6.a9.73
arrangement = 4x2 position = 0,0
6.2.7 Advanced Eos configuration
___________________________________________________________________
3. Getting started
(channels).
3-49