Advertisement
Models: MH-135T-KFA / MH-190T-KFA / MH-215T-KFA
-
Remove the heater and all packaging
materials from the shipping carton.
Tip: Be sure to remove the axle from the
side of the Styrofoam packaging.
Tools Needed:
50 mm Screws (4)
Cord Wraps (Optional)
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
Assembly Instructions
Axle Nuts (2)
Front Handle
- Phillips Head Screw Driver
- 8 mm open end wrench
- 19 mm open end wrench
Tip: Use a power screwdriver and
locking wrench for easier assembly.
8 mm Nuts (12)
Spacers (2)
Wheel Support Frame
Kerosene Forced Air Heater User's Manual
5
Wheels (2)
Spare Drain Plug (1)
Rear Handle
Axle
Advertisement
