Advertisement
- Remove the heater and all packaging materials
from the shipping carton
Cord Wraps (Optional)
Carry Handle Assembly
1. Align holes in the upper housing with the 2
2.
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
Assembly Instructions
Models: MH-45-KFA / MH-75T-KFA
Carry Handle (1)
10 mm Screws (2)
1. Insert tabs into square slots in shell support
and line up screw holes as shown in Figure 4.
2. Insert screws (10 mm) and tighten firmly.
Tools Needed:
- Phillips Head Screw Driver
Shown With Optional Cord Wraps and Power Outlet
Figure 4
Kerosene Forced Air Heater User's Manual
4
Advertisement
