MG MGB TOURER GHN5 Handbook page 21

Fig. 7 5
Fully lower the hood. Fold the two windscreen frame toggle catches (13) rear-
wards to prevent them damaging the back-light.
Roll the back-light and material forward over the folded hood. Position and
secure the two retaining straps (14).
Return the seat back-rests to their original positions.
Raising the
Remove the hood cover. Move the seat tilt catch forward and incline the seat
hood backs towards the front of the car.
Raise the header rail (l l ) and unfold the hood. Engage the rear rail in the anchor
plates (9). Pull the hood slightly forward and engage each hook (7) in its socket
(8) on the body side panel. Position the header rail on the windscreen ensuring
the rail seal is forward of the seal flange. Secure the windscreen frame toggle
catches and fasteners (3),
(4),
and (5) inside the car.
Secure the fasteners (6) at each rear quarter.
Reposition the seats.
Fig. 14
Fig.
15
13