Table of Contents
Advertisement
L A M PS
Pilot The pdot lamp bulbs are incorporated in the headlamps. T o galn access to the
Fig.
8 bulb, remove the sealed beam light unit (4) and d~sconnect the three-pin socket
and bulb holder (5); the capless-type bulb (8) can then be withdrawn.
Direction T o gain access to the direction indicator bulb, unscrew the two retaining screws
indicator
(2) and withdraw lens (1).
Fig.
9
Number-plate Slacken the screw ( l ) remove the metal cover
(2) and glass lens (3). Press in and
Fig.
10
turn the required bulb to release it from the bulb holder. When refitting, ensure
the glass lens engages over the raised portion at each side of the seal and that
the sealing washer is fitted to the cover retaining screw.
Fig.
l 0
I
Hide quick links:
Advertisement
Table of Contents
