Measurement Mode - UPRtek MF250N User Manual And Warranty

2.2 Quick Start
9
Press the "Selection
save measured data.
Notice
Saving data function only for BASIC, SPECTRUM and
FLICKER modes.
" button for 2 seconds to
- 12 -

2.3 Measurement Mode

This screen displays spectrum graphics, λP and
I-Time value.
■ BASIC
This screen show a list of light measurements
record(CCT, CRI, LUX, λP, I-Time).
■ FLICKER
This mode is used to continuously capture
measurements. The screen list 5 items (Flicker
Index, Flicker Percentage, VESA FMA, FFT
Frequency, FFT Magnitude).
This mode is used to real-time monitoring
measurements. You can get the frequency
information such as relative intensity and
frequencies.
■ LIGHTWAVE
This mode is used to real-time monitoring
measurements. You can get continuity light
waveform, and period of wave.
■ SPECTRUM
■ FFT