Belling BCT60INTP Instruction Manual page 20

OPERATION
Using the timer to switch off one or more cooking zones
1. To use the timer to switch off the cooking zone after
cooking, have the cooking zone on and in cook mode.
2. While the heating zone is still blinking touch the timer key,
"- 0:00 +" will show in the timer display and will flash at the
same time.
3. Set the time by touching the "+" "-"key of the timer
a: Touch the "+" "-" key of the timer once to
decrease or increase by 1 minute.
b: By touching and holding your finger on the "+" "-" the
time will increase or decrease in 10 minute increments.
4. When the time is set, it will begin to count down immediately.
The display will show the remaining time.
Note: There will be a dot in the right bottom corner of power level
indicating which zone is selected.
5. When the cooking timer expires, the corresponding cooking zone
will switch off automatically.
Note: Other cooking zones will keep operating if they are turned on
previously.
20