Table of Contents
Advertisement
9. Release component onto a heat resistant surface.
10. Re-tin tip with solder and return ThermoPik to its Tip & Tool Stand.
11. Prepare lands for component replacement.
Use the SX-80 Sodr-X-Tractor handpiece to remove the old solder from the
PCB and to prepare the lands for accepting a new part. Refer to one of the
SX-80 Sodr-X-Tractor manuals for suggested solder removal techniques.
SPECIAL APPLICATIONS
If you require assistance in the use of this handpiece or require assistance
with a special application, contact PACE Product Management at:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Telephone:
(301) 490 - 9860
Fax:
(301) 604 - 8782
Advertisement
Table of Contents
