Table C-2 Managed Pc Boot Agent Boot Menu; Table C-3 Rpl Default Settings; C.2.2 Boot Menu - GE V7865 Series Hardware Reference Manual

C.2.2 Boot Menu

The second method of enabling the Managed PC Boot Agent option is to press the
DEL
the Boot menu, and to the Boot Device Priority sub-menu. Use the arrow keys to
highlight the Managed PC Boot Agent (MBA) option. Repeat entering <+> until the
desired MBA is at the top of the list.
Advance to the Exit menu, select Exit Saving Changes and press
system prompts for confirmation, press Yes. The computer will then restart the
system bootup.

Table C-2 Managed PC Boot Agent Boot Menu

C.2.3 BIOS Features Setup
After the Managed PC Boot Agent has been enabled, there are several boot
options available to the user. These options are RPL (default), TCP/IP, Netware
and PXE. The proceeding screen shots show the defaults for each boot method.
RPL Menu

Table C-3 RPL Default Settings

79 V7865 Hardware Reference Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key during system boot. This will access the BIOS Setup Utility. Advance to
Boot Device Priority
1st Boot Device [MBA UNDI (Bus2 Slot5)]
2nd Boot Device [1st Floppy Drive]
3rd Boot Device [Hard Drive]
NOTE
Options shown may not be available on your system.
Argon Managed PC Boot Agent (MBA) v4.00 (BIOS Integrated)
(c) Copyright 2002 Argon Technology Corporation
All rights reserved
Boot Method:
Config Message:
Message Timeout:
Boot failure Prompt:
Boot Failure:
Use cursor keys to edit: Up/Down change field, Left/Right change value
ESC to quit, F9 restore previous settings, F10 to save
BIOS SETUP UTILITY
Boot
Specifies the boot
sequence from the
available devices.
←→
↑↓
+-
F1
F10
ESC
Configuration
RPL
Enabled
3 Seconds
Wait for timeout
Next boot device
. When the
ENTER
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit