Chore-Time 108 FLEX-AUGER Installation Instructions Manual page 3

Caution, Warning and Danger Decals have been placed on the equipment to warn of potentially dangerous situations. Care
should be taken to keep this information intact and easy to read at all times. Replace missing or damaged safety signs.
Using the equipment for purposes other than specified in this manual may cause personal injury or damage to the equipment.
This is a safety–alert symbol. When you see this symbol on your equipment, be alert
to the potential for personal injury. Chore-Time equipment is designed to be installed
and operated as safely as possible...however, hazards do exist.
Signal words are used in conjunction with the safety–alert symbol to
identify the severity of the warning.
DANGER ........... indicates an imminently hazardous situation
WARNING ......... indicates a potentially hazardous situation
CAUTION .......... indicates a hazardous situation which, if not
DANGER—MOVING AUGER
This decal is placed on the Clean-Out Cover of the
FLEX-AUGER Control Unit.
Severe personal injury will result, if the electrical
power is not disconnected, prior to servicing the
equipment.
DANGER—ELECTRICAL HAZARD
Disconnect electrical power before inspecting or servicing equipment unless
maintenance instructions specifically state otherwise.
Ground all electrical equipment for safety.
All electrical wiring must be done by a qualified electrician in accordance with
local and national electric codes.
Ground all non-current carrying metal parts to guard against electrical shock.
With the exception of motor overload protection, electrical disconnects and
over current protection are not supplied with the equipment.
S A F E T Y I N F O R M A T I O N
Safety–Alert Symbol
Signal Words
which, if not avoided, WILL result in death or
serious injury.
which, if not avoided, COULD result in death
or serious injury.
avoided, MAY result in minor or moderate
injury.
Model 108 Extension Boot Installation Instruction
3
DANGER
WARNING
CAUTION