Fig. 1001 Preferred Position Of Thermo Pro 90 Heater For Storage And Transportation; Packaging/Storage And Shipping - Webasto Thermo Pro 90 Series Service Installations

Thermo Pro 90
10

Packaging/storage and shipping

10.1 General information
The heater or its components to be sent to Webasto for tes-
ting or repair, must be cleaned and packed in such a way that
they are protected from mechanical damage, soiling and en-
vironmental influences during handling, transportation and
storage.
The temperatures during transportation and storage must
not drop below or exceed the ambient temperatures defined
in the technical data in the installation instructions.
When sending in a complete heater, the unit must be com-
pletely drained of fuel. Steps must be taken to ensure that re-
sidual fuel or coolant cannot leak out while packing the unit
and during shipping.
The coolant connection sockets and fuel connection should
be closed off with dummy plugs.
10.2 Storage and transportation
The heater can be stored in any position. There are no restric-
tions.

Fig. 1001 Preferred position of Thermo Pro 90 heater for storage and transportation

NOTE
10 Packaging/storage and shipping
Heaters should always be stored in the original or similar
packaging in closed rooms!
After removing the delivery packaging, the heaters should
only make contact at the aluminium parts. The type label and
the surface of the heaters should be protected from damage
by placing suitable material under them (e.g. cardboard).
The heater should be covered during storage and protected
from dust, dirt and moisture.
The heater must not come in contact with chemicals or their
vapours, e.g. fuels, battery fluids or brake fluids.
During storage, dirt, water or chemicals must not get into the
heater through the openings, see above.
The fuel pipe must be protected from lateral impact that
could cause deformation.
The heater can be transported in any position in suitable
packaging.
The electrical contacts and the fuel pipe must be protected
from mechanical damage.
1001