Rohde & Schwarz R&S FPH User Manual page 76

® Spectrum Rider FPH
R&S
7. Select the new connection labeled R&S Spectrum Rider.
8. Select the "Connect" button to establish the connection.
Connecting the R&S Spectrum Rider in an existing LAN
You can either get the R&S Spectrum Rider IP address automatically from the DHCP
server or manually assign a fixed address.
With manual allocation, a fixed IP address and subnet mask must be assigned to the
R&S Spectrum Rider as described in
After setting up the R&S Spectrum Rider, configure the R&S InstrumentView software
with the assigned IP address as described in
software package"
Free IP address
Contact your IT system administrator to get a free IP address.
In networks with a DHCP server, DHCP permits automatic allocation of the network
configuration to the R&S Spectrum Rider connected via LAN cable. For this purpose,
DHCP has to be active on the R&S Spectrum Rider.
DHCP is off by default. Turn it on like this:
1. In the "Instrument Setup" dialog box, select the "DHCP" item.
2. Select "DHCP" to "On" to activate DHCP.
User Manual 1321.1011.02 ─ 06.00
Chapter 3.2.8.1, "LAN
on page 69.
Connection",
"Configuring the R&S InstrumentView
Getting Started
Instrument Tour
on page 67.
71