Rohde & Schwarz R&S FPH User Manual page 291

R&S ® Spectrum Rider FPH
*IDN?
Identification
Returns the instrument identification.
Return values:
<ID>
Example:
Usage:
*IST?
Individual status query
Returns the contents of the IST flag in decimal form. The IST flag is the status bit
which is sent during a parallel poll.
Return values:
<ISTflag>
Usage:
*OPC
Operation complete
Sets bit 0 in the event status register when all preceding commands have been execu-
ted. This bit can be used to initiate a service request. The query form writes a "1" into
the output buffer as soon as all preceding commands have been executed. This is
used for command synchronization.
*OPT?
Option identification query
Queries the options included in the instrument. For a list of all available options and
their description refer to the data sheet.
Return values:
<Options>
Example:
Usage:
User Manual 1321.1011.02 ─ 06.00
"Rohde&Schwarz,<device type>,<part number>/serial num-
ber>,<firmware version>"
Rohde&Schwarz,FPH,1321.1111.02/100001,V2.21
Query only
0 | 1
Query only
The query returns a list of all installed and activated options,
separated by commas, where:
B<number> describes hardware options
K<number> describes software options
B3,K0,K7,K9
Query only
Remote Commands
Remote Control - Commands
286