Frequency Parameters; Span Selection; Ampt Parameters - Rohde & Schwarz R&S FPH User Manual

R&S ® Spectrum Rider FPH

14.2.2 Frequency Parameters

The [FREQ] key opens the frequency menu that contains functionality to set up the
horizontal axis of the measurement diagram.
Softkey
Center Freq
CF Stepsize
Start Freq
Stop Freq
Freq Offset
Freq Mode

14.2.3 SPAN Selection

The [SPAN] key opens the span menu that contains functionality to set the span.
Softkey
Manual Span
Full Span
Zero Span
Last Span

14.2.4 AMPT Parameters

The [AMPT] key opens the amplitude menu that contains functionality to set up the ver-
tical axis of the measurement diagram.
User Manual 1321.1011.02 ─ 06.00
Menu or Dialog items Parameters
0.1 x Span, Manual,
Step=Center
Frequency
Select Downlink Refresh
Load
Exit
Select Uplink Refresh
Load
Exit
Set to Downlink
Set to Uplink
Menu or Dialog items Parameters
Menu and Softkey Overview
Functions of the Spectrum Analyzer
Parameters selection
Parameters selection
433