Ricoh Pro C901 Operating Instructions Manual page 100

4. Appendix
• When using tab sheets or label paper, make sure to select the appropriate paper type under Tray
Paper Settings.
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed.
• If multiple sheet feeding occurs, load sheets one by one.
• If you load paper of the same size in two or more trays, the machine automatically shifts to the other
tray when the first tray in use runs out of paper. This function is called Auto Tray Switching. (However,
if the paper type of one tray is recycled or special paper, the settings of the other trays must be the
same for the Auto Tray Switching function to work.) This saves interrupting a print run to replenish
paper when making a large number of prints. You can set the paper type of the paper trays.
• If the surface of the paper is dusty, white spots might appear on prints. To remove dust, fan the paper
thoroughly.
4
• The Adjust Paper Curl function might not be able to fully remove curl, depending on the type of paper
and the direction of its grain. If long grain paper does not uncurl properly, try short grain paper instead.
• p.101 "Thick Paper"
98